{"id":470,"date":"2022-03-31T22:53:27","date_gmt":"2022-03-31T14:53:27","guid":{"rendered":"https:\/\/cqiot.cc\/?p=470"},"modified":"2022-05-17T16:37:36","modified_gmt":"2022-05-17T08:37:36","slug":"mks3d%e6%89%93%e5%8d%b0%e4%b8%bb%e6%9d%bf%e4%bd%bf%e7%94%a8klipper%e5%9b%ba%e4%bb%b6-%e4%b8%bb%e6%9d%bf%e5%a4%96%e6%8e%a5%e5%b1%8f%e5%b9%95%e9%85%8d%e7%bd%ae%e6%96%87%e4%bb%b6%e5%8f%8a%e4%b8%bb","status":"publish","type":"post","link":"https:\/\/cqiot.cc\/index.php\/2022\/03\/31\/mks3d%e6%89%93%e5%8d%b0%e4%b8%bb%e6%9d%bf%e4%bd%bf%e7%94%a8klipper%e5%9b%ba%e4%bb%b6-%e4%b8%bb%e6%9d%bf%e5%a4%96%e6%8e%a5%e5%b1%8f%e5%b9%95%e9%85%8d%e7%bd%ae%e6%96%87%e4%bb%b6%e5%8f%8a%e4%b8%bb\/","title":{"rendered":"MKS3D\u6253\u5370\u4e3b\u677f\u4f7f\u7528klipper\u56fa\u4ef6-\u4e3b\u677f\u5916\u63a5\u5c4f\u5e55\u914d\u7f6e\u6587\u4ef6\u53ca\u4e3b\u677fklipper\u914d\u7f6e\u6587\u4ef6"},"content":{"rendered":"\n

MKS Lcd Config<\/strong> \u5c06\u4e0b\u9762\u7684\u914d\u7f6e\u6587\u4ef6\u4fdd\u5b58\u5728klipper\u7684\u914d\u7f6e\u6587\u4ef6\u540c\u76ee\u5f55\u4e0b \u5728printer.cfg\u6587\u4ef6\u91cc\u9762\u6dfb\u52a0<\/p>\n\n\n

[include mks_oled_096_130.cfg] #\u6587\u4ef6\u540d\u81ea\u884c\u66f4\u6362<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

mks_lcd_12864.cfg<\/a><\/p>\n\n\n\n

######################################################################\r\n# \"RepRapDiscount 128x64 Full Graphic Smart Controller\" type displays\r\n######################################################################\r\n\r\n[display]\r\nlcd_type: st7920\r\ncs_pin: EXP1_4\r\nsclk_pin: EXP1_5\r\nsid_pin: EXP1_3\r\nencoder_pins: ^EXP2_5, ^EXP2_3\r\nclick_pin: ^!EXP1_2\r\n#kill_pin: ^!EXP2_8\r\n\r\n[output_pin beeper]\r\npin: EXP1_1<\/code><\/pre>\n\n\n\n
mks_lcd_2004.cfg<\/a><\/p>\n\n\n\n
######################################################################\r\n# \"RepRapDiscount 2004 Smart Controller\" type displays\r\n######################################################################\r\n\r\n[display]\r\nlcd_type: hd44780\r\nrs_pin: EXP1_4\r\ne_pin: EXP1_3\r\nd4_pin: EXP1_5\r\nd5_pin: EXP1_6\r\nd6_pin: EXP1_7\r\nd7_pin: EXP1_8\r\nencoder_pins: ^EXP2_5, ^EXP2_3\r\nclick_pin: ^!EXP1_2\r\n#kill_pin: ^!EXP2_8\r\n\r\n[output_pin beeper]\r\npin: EXP1_1<\/code><\/pre>\n\n\n\n
mks_mini_12864_v1x_v2x.cfg<\/a><\/p>\n\n\n\n
######################################################################\r\n# MKS Mini 12864 LCD\r\n######################################################################\r\n\r\n# Make sure that the EXP1 and EXP2 are rotated correctly on the\r\n# display board. The cutouts on the connectors should be towards the\r\n# center of the PCB. See:\r\n#   https:\/\/reprap.org\/wiki\/MKS_MINI_12864#Physical_Interface\r\n# If they are wrong, the connector housing can be pried off carefully\r\n# with a small screwdriver and relocated the correct way.\r\n\r\n[display]\r\nlcd_type: uc1701\r\ncs_pin: EXP1_6\r\na0_pin: EXP1_7\r\ncontrast: 40\r\nencoder_pins: ^EXP2_5, ^EXP2_3\r\nclick_pin: ^!EXP1_2\r\n## Some micro-controller boards may require an spi bus to be specified:\r\n#spi_bus: spi\r\n## Alternatively, some micro-controller boards may work with software spi:\r\nspi_software_miso_pin: EXP2_1\r\nspi_software_mosi_pin: EXP2_6\r\nspi_software_sclk_pin: EXP2_2\r\n\r\n[output_pin beeper]\r\npin: EXP1_1<\/code><\/pre>\n\n\n\n
mks_mini_12864_v3.cfg<\/a><\/p>\n\n\n\n
######################################################################\r\n# MKS Mini 12864Panel v3.x (with neopixel backlight leds)\r\n######################################################################\r\n\r\n[display]\r\nlcd_type: uc1701\r\ncs_pin: EXP1_3\r\na0_pin: EXP1_4\r\nrst_pin: EXP1_5\r\ncontrast: 63\r\nencoder_pins: ^EXP2_5, ^EXP2_3\r\nclick_pin: ^!EXP1_2\r\n## Some micro-controller boards may require an spi bus to be specified:\r\n#spi_bus: spi\r\n## Alternatively, some micro-controller boards may work with software spi:\r\nspi_software_miso_pin: EXP2_1\r\nspi_software_mosi_pin: EXP2_6\r\nspi_software_sclk_pin: EXP2_2\r\n\r\n[output_pin beeper]\r\npin: EXP1_1\r\n\r\n[neopixel mks_mini12864]\r\npin: EXP1_6\r\nchain_count: 3\r\ncolor_order: RGB\r\ninitial_RED: 1.0\r\ninitial_GREEN: 1.0\r\ninitial_BLUE: 1.0<\/code><\/pre>\n\n\n\n
mks_oled_096_130.cfg<\/a><\/p>\n\n\n\n
######################################################################\r\n# MKS OLED 0.96\r\n######################################################################\r\n\r\n[display]\r\nlcd_type: sh1106\r\ncs_pin: EXP1_4\r\ndc_pin: EXP1_6\r\nreset_pin: EXP1_7\r\ncontrast: 255\r\nvcomh:63\r\ninvert: False\r\nx_offset: 0\r\nencoder_pins: ^EXP2_5, ^EXP2_3\r\nclick_pin: ^!EXP1_2\r\n## Some micro-controller boards may require an spi bus to be specified:\r\n#spi_bus: spi\r\n## Alternatively, some micro-controller boards may work with software spi:\r\nspi_software_miso_pin: EXP1_8\r\nspi_software_mosi_pin: EXP1_3\r\nspi_software_sclk_pin: EXP1_5\r\n\r\n[output_pin beeper]\r\npin: EXP1_1<\/code><\/pre>\n\n\n\n
mks_robin_lite_lcd_12864.cfg<\/a><\/p>\n\n\n\n
######################################################################\r\n# MKS Robin Lite LCD12864\r\n######################################################################\r\n\r\n[display]\r\nlcd_type: st7920\r\ncs_pin: EXP1_1  #LCD_RS\r\nsclk_pin: EXP1_7  #LCD_D4\r\nsid_pin: EXP1_3  #LCD_EN\r\nencoder_pins: ^EXP1_6, ^EXP1_8\r\nclick_pin: ^!EXP1_5\r\n#kill_pin: ^!EXP1_4\r\n\r\n[output_pin beeper]\r\npin: EXP1_14<\/code><\/pre>\n\n\n\n
mks_robin_lite_mini_12864.cfg<\/a><\/p>\n\n\n\n
######################################################################\r\n# MKS Robin Lite Mini 12864\r\n######################################################################\r\n\r\n[display]\r\nlcd_type: uc1701\r\ncs_pin: EXP1_3\r\na0_pin: EXP1_7\r\ncontrast: 50\r\nencoder_pins: ^EXP1_6, ^EXP1_8\r\nclick_pin: ^!EXP1_5\r\n## Some micro-controller boards may require an spi bus to be specified:\r\n#spi_bus: spi\r\n## Alternatively, some micro-controller boards may work with software spi:\r\nspi_software_miso_pin: PB14\r\nspi_software_mosi_pin: EXP1_10\r\nspi_software_sclk_pin: EXP1_9\r\n\r\n[output_pin beeper]\r\npin: EXP1_14<\/code><\/pre>\n\n\n\n
mks_v0_display.cfg<\/a><\/p>\n\n\n\n
[mcu displayEncoder]\r\nserial: \/dev\/serial\/by-id\/usb-Klipper_stm32f042x6_0E0007000D43534E30333220-if00\r\nrestart_method: command\r\n\r\n[display]\r\nlcd_type: sh1106\r\ni2c_mcu: displayEncoder\r\ni2c_bus: i2c1a\r\nencoder_pins: ^!displayEncoder:PA3, ^displayEncoder:PA4\r\nclick_pin: ^!displayEncoder:PA1\r\nkill_pin: ^!displayEncoder:PA5\r\nvcomh: 17\r\nx_offset:2 \r\n#   Set the Vcomh value on SSD1306\/SH1106 displays. This value is\r\n#   associated with a \"smearing\" effect on some OLED displays. The\r\n#   value may range from 0 to 63. Default is 0.\r\n#   Adjust this value if you get some vertical stripes on your display. (31 seems to be a good value)\r\n\r\n#   RGB Values should be set to match your printer colour scheme\r\n[neopixel displayStatus]\r\npin: displayEncoder:PA0\r\nchain_count: 1\r\ncolor_order: GRB\r\ninitial_RED: 0.1\r\ninitial_GREEN: 0.1\r\ninitial_BLUE: 0.1<\/code><\/pre>\n\n\n\n
Klipper \u914d\u7f6e\u6587\u4ef6\u5217\u8868<\/p>\n\n\n\n
Duet2wifi<\/a>Add duet2wifi\/gen-l\/rumba32 klipper firmware and config, update readme<\/a><\/p>\n\n\n\n
MKS Eagle<\/a>Add Nano V3 and eagle firmware use usart3<\/a><\/p>\n\n\n\n
MKS Gen l<\/a>Update klipper pin for mks gen l<\/a><\/p>\n\n\n\n
MKS Lcd Config<\/a>Add lcd config<\/a><\/p>\n\n\n\n
MKS Monster8<\/a>Fix mks monster8 config<\/a><\/p>\n\n\n\n
MKS Robin E3-E3D<\/a>Add robin e3 v1.1 config<\/a><\/p>\n\n\n\n
MKS Robin E3P V2.x<\/a>Add klipper firmware for Robin E3P<\/a><\/p>\n\n\n\n
MKS Robin Lite V1.1<\/a>Add duet2wifi\/gen-l\/rumba32 klipper firmware and config, update readme<\/a><\/p>\n\n\n\n
MKS Robin Mini V2.x<\/a>Add Robin mini klipper firmware and config,<\/a>#3<\/a><\/p>\n\n\n\n
MKS Robin Nano V1.x<\/a>Add MKS Robin Nano(-S) V1.3 klipper firmware and settings<\/a><\/p>\n\n\n\n
MKS Robin Nano V2.x<\/a>Add klipper firmware for Robin E3P<\/a><\/p>\n\n\n\n
MKS Robin Nano V3.x<\/a>Add Nano V3 and eagle firmware use usart3<\/a><\/p>\n\n\n\n
MKS Robin Pro V1.x<\/a>#6<\/a>: add mks robin, robin pro config and firmware<\/a><\/p>\n\n\n\n
MKS Robin<\/a>#6<\/a>: add mks robin, robin pro config and firmware<\/a><\/p>\n\n\n\n
MKS Robin2<\/a>Add Robin2 klipper firmware and config,<\/a>#3<\/a><\/p>\n\n\n\n
MKS Rumba32<\/a>Add duet2wifi\/gen-l\/rumba32 klipper firmware and config, update readme<\/a><\/p>\n\n\n\n
MKS Sgen l V1<\/a>Add duet2wifi\/gen-l\/rumba32 klipper firmware and config, update readme<\/a><\/p>\n\n\n\n
MKS Sgen l V2<\/a>Add Robin2 klipper firmware and config,<\/a>#3<\/a><\/p>\n\n\n\n
Klipper\u56fa\u4ef6\u4f7f\u7528\u8bf4\u660e-Nano V3.pdf<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"
MKS Lcd Config \u5c06\u4e0b\u9762\u7684\u914d\u7f6e\u6587\u4ef6\u4fdd\u5b58\u5728kl...<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[14],"tags":[31,24,25,26,27,23,28,29,30],"class_list":["post-470","post","type-post","status-publish","format-standard","hentry","category-3dprint","tag-klipper","tag-mks_lcd_12864-cfg","tag-mks_lcd_2004-cfg","tag-mks_mini_12864_v1x_v2x-cfg","tag-mks_mini_12864_v3-cfg","tag-mks_oled_096_130-cfg","tag-mks_robin_lite_lcd_12864-cfg","tag-mks_robin_lite_mini_12864-cfg","tag-mks_v0_display-cfg"],"_links":{"self":[{"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/posts\/470","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/comments?post=470"}],"version-history":[{"count":1,"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/posts\/470\/revisions"}],"predecessor-version":[{"id":473,"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/posts\/470\/revisions\/473"}],"wp:attachment":[{"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/media?parent=470"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/categories?post=470"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cqiot.cc\/index.php\/wp-json\/wp\/v2\/tags?post=470"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}